波分复用器
DWDM Thermal AWG Module
Description
DWDM Thermal Arrayed Waveguide Grating Module
F-tone’s Dense Wavelength Division Mux/Demultiplexer Thermal Arrayed Waveguide Grating Modules are designed for use within the C- or L-band release of DWDM system. To decrease the power dissipation of the devices in different environmental conditions, the AWG package is special designed with selection of reliable thermal plastic with low thermal conduction, and the AWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. Custom frequency grids, fiber types and connector options are also available.
Key Features
- High stability and reliability
- Low Insertion Loss
- Low PDL
- High Channel Isolation
- Multi-channel number
Applications
- WDM transmission
- WDM based ADM
- Metro and long haul net works
- Wavelength selective routing
TAWG Specifications
|
Parameter |
Unit |
Specifications |
|||
|
Gaussian |
Flat-Top |
||||
|
ITU Band |
GHz |
±12.5 |
|||
|
Channel Spacing |
GHz |
100 |
|||
|
Number of channels |
16,32,40,48 or customize |
||||
|
Wavelength accuracy |
Max |
nm |
0.05 |
||
|
Insertion Loss |
Max |
dB |
4.5 |
6.0 |
|
|
-1dB passband |
Min |
nm |
0.2 |
0.4 |
|
|
-3dB passband |
Min |
nm |
0.4 |
0.6 |
|
|
Isolation |
Adjacent Channel |
Min |
dB |
27 |
|
|
Non-adjacent Channel |
Min |
dB |
35 |
||
|
Total Crosstalk |
Min |
dB |
23 |
23 |
|
|
Ripple in Passband |
Max |
dB |
1.0 |
||
|
Polarization Dependent Loss |
Max |
dB |
0.8 |
||
|
Directivity |
Min |
dB |
50 |
||
|
Return Loss |
Min |
dB |
45 |
||
|
Polarization Mode Dispersion |
Max |
ps |
0.5 |
||
|
Power Handling |
Max |
mW |
300 |
||
|
Drive voltage (Heater) |
Type |
V |
5.0 |
||
|
Drive current (Heater) |
Type |
A |
2.0 |
||
|
Fiber Type |
Corning SMF-28 / SMF-28e or customize |
||||
|
Operating Temperature |
°C |
5~70 |
|||
|
Storage Temperature |
°C |
-40~85 |
|||
|
Package Dimension |
mm |
(L)135×(W)65×(H)20 |
|||
|
19’’ Rack mount Package |
mm |
1U, (L)230×(W)440×(H)44 |
|||
Notes：Specifications without fiber connectors
Electrical Specifications
|
Parameters |
Conditions |
Specifications |
Unit |
||
|
MIN |
MAX |
||||
|
Set Point Temperature of Module |
Heater Based Temperature Control |
68 |
85 |
°C |
|
|
Temperature Sensor |
Thermistor |
RTD |
|||
|
Temperature Sensor Resistance |
25°C |
10 |
kΩ |
||
|
Heater Power Consumption |
Peak Power Required to Warm Module from 0 °C to Set Point Temperature with Airflow of 0.1 linear meter per second (22.5 linear ft/min) in the warm-up time . |
8 |
W |
||
|
Heater Resistance |
3 |
Ω |
|||
|
Module Warm-Up Time |
Time for module to be warmed up from -5oC to the set-point temperature |
10 |
Mins |
||
|
Pin Assignment |
Pin1 |
Heater or TEC(+) |
|||
|
Pin2 |
NC |
||||
|
Pin3 |
NC |
||||
|
Pin4 |
Thermistor A |
||||
|
Pin5 |
NC |
||||
|
Pin6 |
NC |
||||
|
Pin7 |
Thermistor B |
||||
|
Pin8 |
NC |
||||
|
Pin9 |
NC |
||||
|
Pin10 |
Heater or TEC(-) |
||||
Related Products
粗波分复用模？？？？？
粗波分复用模？？？？？/粗波剖析复用模？？？？？是宽带波分复用系统中的要害器件，，，，，，接纳介质膜滤光片滤波，，，，，，波长稳固性好；；；；；接纳密封工艺封装，，，，，，情形稳固性高...
粗波分复用器
CWDM粗波分复用器特征：低插入消耗，，，，，，高隔离度、低偏振相关消耗、紧凑精巧设计、优越的通道一致性、事情波长规模宽：1260nm ~1620nm、事情温度规模广：-5℃~75℃、高可靠性和稳固性;
CWDM粗波分复用器应用于CWDM 系统、无源光网络PON、CATV系统
微型CWDM波分模？？？？？
微型CWDM波分模？？？？？榛诒∧ぢ瞬ㄆ忠蘸妥杂煽占涫忠，，，，，，可用于1271~1611波长规模内4通道或8通道CWDM波长的复用或解复用，，，，，，并可以带有特另外升级口。 。
DWDM麋集波分复用模？？？？？
DWDM麋集波分复用模？？？？？槭强泶ǚ指从孟低持械囊ζ骷，，，，，，接纳介质膜滤光片滤波，，，，，，波长稳固性好；；；；；接纳密封工艺封装，，，，，，情形稳固性高。 。